Fatal Error: Can't alloc dataspace in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617
Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12
Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14
Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16
Warning: alloc datasize:976632435 in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617
Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12
Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14
Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16
6ES7675-3AG30-0QA0 SIMATIC MICROBOX 420-T
SIMATIC MICROBOX 420-T, WITH SIMATIC WINAC RTX 2005, TECHNOLOGY/MOTION CONTROL-FUNC. AND SIMATIC SOFTNET PG, INSTALLED READY TO RUN ON MICROBOX PC420 WITH PIII 933 MHZ, PROFIBUS DP, 512 MB RAM, 2 GB CF-CARD WINDOWS XP EMBEDDED, LANGUAGE ENGLISCH
General information
Hardware product version
V1
Firmware version
V1.0 + SP1
PC configuration
Computer platform
Microbox PC 420
Processor selection
P III 933 MHz
Main memory
512 Mbyte RAM
Compact Flash
2 Gbyte
Operating systems
Windows XP embedded SP2
Installed software
● Control
WinAC T V1.0 SP1
● Communication
SOFTNET LEAN for IE/SIMATIC NET 2005 V3.0.1
Supply voltage
Rated value, 24 V DC
Yes
permissible range, lower limit (DC)
20.4 V
permissible range, upper limit (DC)
28.8 V
Mains buffering
● Mains/voltage failure stored energy time
5 ms
Input current
Rated value at 24 V DC
2 500 mA
Power
Power consumption, max.
61 W
Battery
Backup battery
● Backup time, max.
5 y
CPU processing times
for bit operations, typ.
0.004 µs
for fixed point arithmetic, typ.
0.003 µs
for floating point arithmetic, typ.
0.004 µs
CPU-blocks
DB
● Number, max.
65 535
● Size, max.
64 kbyte
FB
● Number, max.
65 536
● Size, max.
64 kbyte
FC
● Number, max.
65 536
OB
● Number, max.
30
● Size, max.
64 kbyte
● Number of free cycle OBs
1
● Number of time alarm OBs
1
● Number of delay alarm OBs
1
● Number of time interrupt OBs
9
● Number of process alarm OBs
1
● Number of startup OBs
1
● Number of asynchronous error OBs
7
● Number of synchronous error OBs
2
● Number of diagnostic alarm OBs
1
Nesting depth
● per priority class
24
● additional within an error OB
2
Counters, timers and their retentivity
S7 counter
● Number
512
Retentivity
— can be set
Yes
— lower limit
0
— upper limit
512
— preset
8
Counting range
— can be set
Yes
— lower limit
0
— upper limit
999
IEC counter
● present
Yes
● Type
SFB
● Number
3
S7 times
● Number
512
Retentivity
— can be set
Yes
— lower limit
0
— upper limit
512
— preset
0
Time range
— lower limit
10 ms
— upper limit
6 390 s
IEC timer
● present
Yes
● Type
SFB
● Number
3
Data areas and their retentivity
retentive data area, total
30 KB
retentive data area in total (incl. times, counters, flags), max.
30 kbyte
Flag
● Number, max.
16 384 byte
● Number of clock memories
8
Data blocks
● Number, max.
65 535
● Size, max.
64 kbyte
● Retentivity adjustable
Yes
● Retentivity preset
Yes
Local data
● adjustable, max.
16 kbyte
● preset
256 byte
● per priority class, max.
20 byte
Address area
I/O address area
● Inputs
2 000 byte
● Outputs
2 048 byte
Process image
● Inputs
2 048 byte
● Outputs
2 048 byte
● Inputs, adjustable
2 048 kbyte
● Outputs, adjustable
2 048 kbyte
● Inputs, default
512 byte
● Outputs, default
512 byte
Subprocess images
● Number of subprocess images, max.
15
Digital channels
● Inputs
16 000
● Outputs
16 376
● Inputs, of which central
0
● Outputs, of which central
0
Analog channels
● Inputs
1 000
● Outputs
1 023
● Inputs, of which central
0
● Outputs, of which central
0
Addressing volume
● Inputs
2 048 byte
● Outputs
2 048 byte
Address space per module
● Address space per module, max.
244 byte
Time of day
Clock
● Hardware clock (real-time clock)
Yes
● battery-backed and synchronizable
No
● Deviation per day, max.
5 s
● Backup time
5 y
Operating hours counter
● Number
8
● Number/Number range
0 to 7
● Range of values
32767
● Granularity
1 hour
● retentive
Yes
Clock synchronization
● supported
No
● to PC-CP, slave
No
● to MPI, master
No
● to MPI, slave
No
● in AS, master
No
● in AS, slave
No
● on Ethernet via NTP
No
Digital inputs
integrated channels (DI)
0
Digital outputs
Number of digital outputs
8
● of which high-speed outputs
8
integrated channels (DO)
8
Functions
For technology functions, e.g. high-speed cam switch signals
short-circuit protection
Yes
Switching capacity of the outputs
● Lamp load, max.
5 W
Load resistance range
● lower limit
48 Ω
● upper limit
4 Ω
Output voltage
● for signal "0", max.
3 V
Output current
● for signal "1" rated value
0.5 A
● for signal "1" permissible range, min.
5 mA
● for signal "1" permissible range, max.
0.6 A
Parallel switching of 2 outputs
● for increased power
No
● for redundant control of a load
No
Switching frequency
● with resistive load, max.
1 000 Hz
● with inductive load, max.
0.2 Hz
● on lamp load, max.
10 Hz
Cable length
● Cable length, shielded, max.
25 m
● Cable length unshielded, max.
25 m
Analog inputs
Integrated channels (AI)
0
Analog outputs
Integrated channels (AO)
0
Interfaces
USB port
2xUSB 2.0 high curr./2xUSB 2.0 low curr.
serial interface
COM1 (RS232)
Video interfaces
● Graphics interface
DVI VGA / DVI integrated
Industrial Ethernet
● Industrial Ethernet interface
2x VUA VT6105L OM/VT6106S, 10/100 Mbit/s with RJ45
1st interface
Physics
RS 485
Isolated
Yes
Functionality
● MPI
No
● DP master
Yes
● DP slave
No
● Point-to-point connection
No
DP master
● Number of connections, max.
14
● Transmission rate, max.
12 Mbit/s
● Number of DP slaves, max.
32
Services
— PG/OP communication
Yes
— Routing
Yes
— Global data communication
No
— S7 basic communication
No
— S7 communication
Yes
— S7 communication, as client
Yes
— S7 communication, as server
Yes
— Equidistance mode support
No
— SYNC/FREEZE
Yes
— Activation/deactivation of DP slaves
Yes
— Direct data exchange (slave-to-slave communication)
Yes
— DPV1
Yes
User data per DP slave
— User data per DP slave, max.
244 byte
— Inputs, max.
244 byte
— Outputs, max.
244 byte
2nd interface
Physics
RS 485
Isolated
Yes
Automatic detection of transmission speed
Yes
Functionality
● MPI
No
● DP master
Yes
● DP slave
No
● PROFINET IO Controller
No
● PROFINET CBA
No
● Point-to-point connection
No
DP master
● Number of connections, max.
0
● Transmission rate, max.
12 Mbit/s
● Number of DP slaves, max.
32
Services
— PG/OP communication
No
— Routing
Yes
— Global data communication
No
— S7 basic communication
No
— S7 communication
No
— S7 communication, as client
No
— S7 communication, as server
No
— Equidistance mode support
Yes
— SYNC/FREEZE
No
— Activation/deactivation of DP slaves
No
— Direct data exchange (slave-to-slave communication)
No
— DPV1
Yes
User data per DP slave
— User data per DP slave, max.
244 byte
— Inputs, max.
244 byte
— Outputs, max.
244 byte
Communication functions
PG/OP communication
Yes
Global data communication
● supported
No
S7 basic communication
● supported
No
S7 communication
● supported
Yes
● as server
Yes
● As client
Yes
● User data per job, max.
64 kbyte
● User data per job (of which consistent), max.
64 kbyte
S5-compatible communication
● supported
No
Standard communication (FMS)
● supported
No
Open IE communication
● TCP/IP
No
● ISO-on-TCP (RFC1006)
No
● UDP
No
Number of connections
● overall
64
● usable for PG communication
63
— reserved for PG communication
1
● usable for OP communication
63
— reserved for OP communication
1
● usable for S7 basic communication
0
● usable for S7 communication
62
● usable for routing
62
S7 message functions
Number of login stations for message functions, max.
Fatal Error: Can't alloc dataspace in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617
Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12
Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14
Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16
Warning: alloc datasize:976632435 in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617
Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12
Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14
Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16
