6ES7131-4BB01-0AB0 ET200S, EL-MOD., 2DI HF, DC 24V, 5PCS.

6ES7131-4BB01-0AB0 ET200S, EL-MOD., 2DI HF, DC 24V, 5PCS.

Product Code: 6ES7131-4BB01-0AB0

Availability: In Stock

Price: $65.76
Qty:
Add to Wish List
Add to Compare
  
 
Artikelnummer 6ES7131-4BB01-0AB0
SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 2 DI HIGH FEATURE 24V DC, 15 MM WIDTH WITH PARAM. F. INPUT DELAY DIAGNOSIS F. ENCODER SHORT- CIRCUIT W. LED SF (GROUP FAULT) 5 PIECES PER PACKAGING UNIT
Supply voltage
24 V DC Yes; From power module
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
from backplane bus 3.3 V DC, max. 10 mA
from supply voltage L+, max. Dependent on encoder
Encoder supply
Output voltage min. L+ (-0.5 V), under load
Short-circuit protection Yes; Electronic
Output current
● Output current, rated value 500 mA
● Output current, permissible range 0 to 500 mA
Power loss
Power loss, typ. 0.4 W
Address area
Address space per module
● with packing 2 bit
● without packing 1 byte
Digital inputs
Number of digital inputs 2
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Input voltage
● Type of input voltage DC
● Rated value, DC 24 V
● for signal "0" -30 to +5 V
Input current
● for signal "1", typ. 8 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable Yes; 0.1 / 0.5 / 3 / 15 ms
— at "0" to "1", min. 0.05 / 0.4 / 2.7 / 14.85
— at "0" to "1", max. 0,15 / 0,6 / 3,3 / 15,15
— at "1" to "0", min. 0.05 / 0.4 / 2.7 / 14.85
— at "1" to "0", max. 0,15 / 0,6 / 3,3 / 15,15
Cable length
● Cable length, shielded, max. 1 000 m
● Cable length unshielded, max. 600 m
Encoder
Connectable encoders
● 2-wire sensor Yes
— permissible quiescent current (2-wire sensor), max. 1.5 mA
Interrupts/diagnostics/status information
Diagnostic messages
● Diagnostic functions Yes
● Short-circuit Yes; Short-circuit of outputs to ground; module by module
Diagnostics indication LED
● Group error SF (red) Yes
● Status indicator digital input (green) Yes; per channel
Parameter
Remark 3 byte
Diagnostics short-circuit Disable / enable
Galvanic isolation
Galvanic isolation digital inputs
● between the channels No
● between the channels and the backplane bus Yes
Permissible potential difference
between different circuits 75 VDC / 60 VAC
Isolation
Isolation tested with 500 V DC
Dimensions
Width 15 mm
Height 81 mm
Depth 52 mm
Weights
Weight, approx. 35 g
last modified: 21.08.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue
Fatal Error: Can't alloc dataspace in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617 Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12 Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14 Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16 Warning: alloc datasize:976632435 in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617 Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12 Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14 Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16