Fatal Error: Can't alloc dataspace in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617
Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12
Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14
Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16
Warning: alloc datasize:976632435 in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617
Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12
Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14
Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16
6ES7431-1KF20-0AB0 SIMATIC S7-400, SM 431
SIMATIC S7-400, SM 431 ANALOG INPUT MODULE OPTIC. ISOLATED, 8 AI, 14 BIT RESOLUTION, U/I/RESIST. 0.416 MS SCAN TIME
Supply voltage
Load voltage L+
● Rated value (DC)
24 V; Only required for supplying 2-wire transmitters
● Reverse polarity protection
Yes
Input current
from load voltage L+ (without load), max.
200 mA; for 8 connected, fully controlled 2-wire transmitters
from backplane bus 5 V DC, max.
1 000 mA
Power losses
Power loss, typ.
4.9 W
Hardware configuration
Slots
● Required slots
1
Analog inputs
Number of analog inputs
8
Number of analog inputs for voltage/current measurement
8
Number of analog inputs for resistance measurement
4
permissible input voltage for voltage input (destruction limit), max.
18 V; 18 V continuous, 75 V for 1 ms (mark to space ratio 1:20)
permissible input current for current input (destruction limit), max.
40 mA; Permanent
Input ranges
● Voltage
Yes
● Current
Yes
● Thermocouple
No
● Resistance thermometer
No
● Resistance
Yes
Input ranges (rated values), voltages
● 1 to 5 V
Yes
● Input resistance (1 to 5 V)
10 MΩ
● -1 V to +1 V
Yes
● Input resistance (-1 V to +1 V)
10 MΩ
● -10 V to +10 V
Yes
● Input resistance (-10 V to +10 V)
100 kΩ
Input ranges (rated values), currents
● -20 to +20 mA
Yes
● Input resistance (-20 to +20 mA)
50 Ω
● 4 to 20 mA
Yes
● Input resistance (4 to 20 mA)
50 kΩ
Input ranges (rated values), resistors
● 0 to 600 ohms
Yes
Cable length
● Cable length, shielded, max.
200 m
Analog value creation
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.
14 bit; 14 / 14 / 14
● Integration time, parameterizable
Yes
● Basic conversion time, ms
52 µs
● Interference voltage suppression for interference frequency f1 in Hz
none / 400 / 60 / 50 Hz
Encoder
Connection of signal encoders
● for current measurement as 2-wire transducer
Yes
● for current measurement as 4-wire transducer
Yes
● for resistance measurement with two-wire connection
Yes; Line resistances are also measured
● for resistance measurement with three-wire connection
Yes; Line resistances are also measured
● for resistance measurement with four-wire connection
Yes
Errors/accuracies
Operational limit in overall temperature range
● Voltage, relative to input area, (+/-)
0.7 %; +/-0.7% at +/-1 V; +/-0.9% at +/-10 V, 1 to 5 V
● Current, relative to input area, (+/-)
0.8 %; at +/-20 mA, 4 to 20 mA
● Resistance, relative to input area, (+/-)
1 %
Basic error limit (operational limit at 25 °C)
● Voltage, relative to input area, (+/-)
0.6 %; 0.6% at +/-1 V; 0.75% at +/-10 V, 1 to 5 V
● Current, relative to input area, (+/-)
0.7 %; at +/-20 mA, 4 to 20 mA
● Resistance, relative to input area, (+/-)
0.7 %; 0 to 600 ohms
Galvanic isolation
Galvanic isolation analog inputs
● Galvanic isolation analog inputs
Yes; internal/external
● between the channels
No
Permissible potential difference
between the inputs (UCM)
8 V AC
Isolation
Isolation checked with
2120 V DC between bus and analog part; 500 V DC between bus and local ground; 707 V DC between analog part and L+/M; 2120 V DC between analog part and local ground; 2120 V DC between L+/M and local ground
Fatal Error: Can't alloc dataspace in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617
Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12
Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14
Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16
Warning: alloc datasize:976632435 in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617
Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12
Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14
Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16