6ES7141-4BF00-0AA0 ET200PRO, EM 8DI 24V DC

6ES7141-4BF00-0AA0 ET200PRO, EM 8DI 24V DC

Product Code: 6ES7141-4BF00-0AA0

Availability: In Stock

Price: $47.95
Qty:
Add to Wish List
Add to Compare
  
 
Artikelnummer 6ES7141-4BF00-0AA0
SIMATIC DP, ELECTRONIC MODULE FOR ET200PRO 8 DI DC 24V, MODULE DIAGNOSTICS; INCLUSIVE BUS MODULE CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY
FH technology
Module for failsafe applications No
Supply voltage
24 V DC Yes
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes; Against destruction; encoder power supply outputs applied with reversed polarity
Input current
from backplane bus 3.3 V DC, max. 20 mA
from supply voltage 1L+, max. 20 mA
Encoder supply
Number of outputs 8
short-circuit protection Yes; per module, electronic
Output current
● up to 55 °C, max. 1 A
Power losses
Power loss, typ. 2.5 W
Address area
Occupied address area
● Inputs 1 byte
Digital inputs
Number of digital inputs 8
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Input characteristic curve in accordance with IEC 61131, type 2 No
Number of simultaneously controllable inputs
all mounting positions
— up to 55 °C, max. 8
Input voltage
● Type of input voltage DC
● Rated value (DC) 24 V
● for signal "0" -3 to +5V
● for signal "1" 13 to 30 V
Input current
● for signal "1", typ. 7 mA
Input delay (for rated value of input voltage)
for standard inputs
— Parameterizable No
— at "0" to "1", min. 1.2 ms
— at "0" to "1", max. 4.8 ms
— at "1" to "0", min. 1.2 ms
— at "1" to "0", max. 4.8 ms
Cable length
● Cable length, shielded, max. 30 m
● Cable length unshielded, max. 30 m
Encoder
Connectable encoders
● 2-wire sensor Yes
— Permissible quiescent current (2-wire sensor), max. 1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal) No
Interrupts/diagnostics/status information
Diagnostic messages
● Diagnostic functions Yes
● Diagnostic information readable Yes
● Short circuit Yes; Sensor supply to M; module by module
Diagnostics indication LED
● Group error SF (red) Yes
● Status indicator digital input (green) Yes; Per channel
Parameter
Diagnosis: short circuit Sensor supply to M; module by module
Galvanic isolation
between backplane bus and all other circuit components Yes
Galvanic isolation digital inputs
● between the channels No
● between the channels and the backplane bus Yes
Permissible potential difference
between different circuits 75 VDC / 60 VAC
Isolation
Isolation checked with 500 V DC
Degree and class of protection
Degree of protection to EN 60529
● IP65 Yes
● IP66 Yes
● IP67 Yes
Dimensions
Width 45 mm
Height 130 mm
Depth 35 mm
Weights
Weight, approx. 140 g
last modified: 13.10.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue
Fatal Error: Can't alloc dataspace in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617 Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12 Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14 Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16 Warning: alloc datasize:976632435 in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617 Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12 Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14 Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16