6ES7331-7KB82-0AB0 SIMATIC S7-300, ANALOG INPUT

6ES7331-7KB82-0AB0 SIMATIC S7-300, ANALOG INPUT

Product Code: 6ES7331-7KB82-0AB0

Availability: In Stock

Price: $235.64
Qty:
Add to Wish List
Add to Compare
  
 
Artikelnummer 6ES7331-7KB82-0AB0
SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATED, FOR EXPANDED TEMPERATURE RANGE, 2 AI, 9/12/14 BIT RESOLUTION, U/I/THERMOCOUPLE/RESISTANCE, INTERRUPT, DIAGNOSTICS, 20 PIN
Supply voltage
Load voltage L+
● Rated value (DC) 24 V
● Reverse polarity protection Yes
Input current
from load voltage L+ (without load), max. 80 mA
from backplane bus 5 V DC, max. 50 mA
Power loss
Power loss, typ. 1.3 W
Analog inputs
Number of analog inputs 2
Number of analog inputs for resistance measurement 1
permissible input voltage for voltage input (destruction limit), max. 20 V
permissible input current for current input (destruction limit), max. 40 mA
Input ranges
● Voltage Yes
● Current Yes
● Thermocouple Yes
● Resistance thermometer Yes
● Resistance Yes
Input ranges (rated values), voltages
● 1 to 5 V Yes
● Input resistance (1 to 5 V) 100 kΩ
● -1 V to +1 V Yes
● Input resistance (-1 V to +1 V) 10 MΩ
● -10 V to +10 V Yes
● Input resistance (-10 V to +10 V) 100 kΩ
● -2.5 V to +2.5 V Yes
● Input resistance (-2.5 V to +2.5 V) 100 kΩ
● -250 mV to +250 mV Yes
● Input resistance (-250 mV to +250 mV) 10 MΩ
● -5 V to +5 V Yes
● Input resistance (-5 V to +5 V) 100 kΩ
● -500 mV to +500 mV Yes
● Input resistance (-500 mV to +500 mV) 10 MΩ
● -80 mV to +80 mV Yes
● Input resistance (-80 mV to +80 mV) 10 MΩ
Input ranges (rated values), currents
● 0 to 20 mA Yes
● Input resistance (0 to 20 mA) 25 Ω
● -10 to +10 mA Yes
● Input resistance (-10 to +10 mA) 25 Ω
● -20 to +20 mA Yes
● Input resistance (-20 to +20 mA) 25 Ω
● -3.2 to +3.2 mA Yes
● Input resistance (-3.2 to +3.2 mA) 25 Ω
● 4 to 20 mA Yes
● Input resistance (4 to 20 mA) 25 Ω
Input ranges (rated values), thermocouples
● Type E Yes
● Input resistance (Type E) 10 MΩ
● Type J Yes
● Input resistance (type J) 10 MΩ
● Type K Yes
● Input resistance (Type K) 10 MΩ
● Type N Yes
● Input resistance (Type N) 10 MΩ
Input ranges (rated values), resistance thermometers
● Ni 100 Yes; Standard
● Pt 100 Yes; Standard
● Input resistance (Pt 100) 10 MΩ
Input ranges (rated values), resistors
● 0 to 150 Ohm Yes
● Input resistance (0 to 150 Ohm) 10 MΩ
● 0 to 300 Ohm Yes
● Input resistance (0 to 300 Ohm) 10 MΩ
● 0 to 600 Ohm Yes
● Input resistance (0 to 600 Ohm) 10 MΩ
Thermocouple (TC)
Temperature compensation
— parameterizable Yes
— internal temperature compensation Yes
— external temperature compensation with compensations socket Yes
Characteristic linearization
● parameterizable Yes
— for thermocouples Type E, J, K, N
— for resistance thermometer Pt100 (standard), Ni100 (standard)
Cable length
● Cable length, shielded, max. 200 m; 50 m at 80 mV
Analog value generation
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max. 15 bit; Unipolar: 9/12/12/14 bits; bipolar: 9 bits + sign/12 bits + sign/12 bits + sign/14 bits + sign
● Integration time, ms 2,5 / 16,67 / 20 / 100 ms
● Interference voltage suppression for interference frequency f1 in Hz 400 / 60 / 50 / 10 Hz
Encoder
Connection of signal encoders
● for current measurement as 2-wire transducer Yes
● for current measurement as 4-wire transducer Yes
● for resistance measurement with two-wire connection Yes
● for resistance measurement with three-wire connection Yes
● for resistance measurement with four-wire connection Yes
Errors/accuracies
Operational error limit in overall temperature range
● Voltage, relative to input area, (+/-) 1 %
● Current, relative to input area, (+/-) 1 %
● Resistance, relative to input area, (+/-) 1 %
● Resistance thermometer, relative to input area, (+/-) 1 %
Basic error limit (operational limit at 25 °C)
● Voltage, relative to input area, (+/-) 0.6 %
● Current, relative to input area, (+/-) 0.6 %
● Resistance, relative to input area, (+/-) 0.6 %
● Resistance thermometer, relative to input area, (+/-) 0.6 %
Interrupts/diagnostics/status information
Alarms
● Diagnostic alarm Yes; Channel 0
● Limit value alarm Yes
Diagnostic messages
● Diagnostics Yes; Diagnostic information readable
● Group error Yes
Galvanic isolation
Galvanic isolation analog inputs
● between the channels and the backplane bus Yes
Isolation
Isolation tested with 500 V DC
Connection method
required front connector 20-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weights
Weight, approx. 250 g
last modified: 21.08.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue
Fatal Error: Can't alloc dataspace in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617 Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12 Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14 Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16 Warning: alloc datasize:976632435 in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617 Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12 Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14 Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16